Star Micronics SP200F SERIES Manuel d'utilisateur télécharger pdf (Page 47)

PARTS REPLACEMENT

4-7

1. Removal

• Remove the printer mechanism according to the

procedure of item 4.2.

• Two solderd lead wires (Black and red)

• Stop ring 1

• Gear 2

• Stop ring 3

• Slide the ribbon base (W) 4 in the direction of

the black arrow and remove it.

• Screw 5

• Secure the frame and forcibly open the carriage

motor unit in the direction of the white arrow .

• Carriage motor unit 6

2. Adjustment

• After assembling, adjust the cam position of the

ribbon color change mechanism by referring to

item 3.4.

• After that, adjust the column slippage by refer-

ring to item 3.3.

4.11 Paper End Switch Board Unit

1. Remove

• Printer mechanism according to the procedure des-

cribed in Section 4.2.

• The two soldered lead wires 1 with the soldering

iron. (White)

• Screw 2

• Paper end switch board unit 3

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 89 90

Pas de commentaire

Star Micronics SP200F SERIES Manuel d'utilisateur Page 47