Star Micronics SP200F SERIES Manuel d'utilisateur télécharger pdf (Page 43)

PARTS REPLACEMENT

4-3

4.3 Main Logic Board

1. Turn off the power switch, disconnect the power cord

from wall outlet.

2. Remove

• Printer Mechanism according to the procedure

described in Section 4.2

3. Main Chassis 1 and Board Chassis 2 from Lower

Case 3.

4. Remove

• Cable unit and connector

• Two screws(Main chassis) 4

• Two screws(Board) 5

• Two screws and spacers(interface connector) 6

• Main logic board 7

4.4 Power Supply Unit

1. Remove

• Main chassis 1 according to the procedure de-

scribed in Section 4.3.

• One screw with wire 3

• Two screws 2 for transformer

• Remove the power supply cord 4, the power

switch 5 and the power supply unit 6 by sliding

it.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 89 90

Pas de commentaire

Star Micronics SP200F SERIES Manuel d'utilisateur Page 43