Star Micronics LC-90 NX-1010 Manuel d'utilisateur télécharger pdf (Page 30)

24 User Setup Utility

Using the Paper window

While in the User Setup Utility, select Paper from the menu bar.

The following describes the various settings that are available for each

parameter on this screen.

Page Length

❏ Specify the length of the paper you are using.

Line Spacing

❏ Select the line spacing you want to use.

Auto LF with CR

❏ Switch auto LF with CR on (Enabled) or off (Disabled).

When auto LF (line feed) with CR (carriage return) is disabled, the computer

must send both a line feed code and a carriage return code at the end of each line.

Most applications do this automatically. When auto LF with CR is enabled, the

printer automatically performs a line feed whenever it receives a carriage return

from the computer.

Note the following check points when trying to figure out which setting to use

here:

✓

If you ﬁnd that your output is double-spaced when it should not be, change

this setting to Disabled.

✓ If you ﬁnd that lines are printing over each other, change this setting to

Enabled.

Exit

Load Save General Font Paper Adjust. Port Help

Page-

Length

(•) 11 inch

( ) 8 inch

Line-

Spacing

(•) 1/6 Inch

( ) 1/8 Inch

Auto LF

with CR

(•) Disabled

( ) Enabled

Top-

Margin

(•) 1/6"

Paper-

Out

(•) Enabled

( ) Disabled

Tear-

Off

( ) Enabled

(•) Disabled

Timeout

Printing

(•) Enabled

( ) Disabled

= Scroll up

= Scroll down

= Menu Select

TAB

SPACE

= Next Box

= Set Function

Current Data:

Current Paper Setting

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 69 70

Commentaires sur ces manuels

Pas de commentaire

Star Micronics LC-90 NX-1010 Manuel d'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Star Micronics LC-90 NX-1010