Star Micronics LC-90 NX-1010 Manuel d'utilisateur télécharger pdf (Page 11)

Installing the ribbon cartridge 5

Installing the ribbon cartridge

❏

Rotate the knob on the cartridge clockwise to take up any slack in the

ribbon.

❏

Carefully push the cartridge holder by hand all the way to the left side as far

as it will go.

Important!

Never try to move the print head while the printer is plugged in. Doing so can

damage the printer. If you have just used the printer, let the print head cool for

a few minutes before you touch it.

❏

Carefully place the cartridge onto the cartridge holder making sure that the

spindle of the holder ﬁts into the socket on the bottom of the cartridge.

❏

Press down gently but ﬁrmly on the cartridge to make sure that it is securely

in place. The cartridge should move slightly (about 1/10” or 2.5mm) when

you press down on it.

❏ Rotate the knob on the cartridge again to take up any slack.

Print head shield

Knob

Ribbon

Print head shield

Print head

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 69 70

Pas de commentaire

Star Micronics LC-90 NX-1010 Manuel d'utilisateur Page 11