Star Micronics SM-S401-DB38 Manuel télécharger pdf (Page 14)

- 13 -

Press FEED button one time.

You will see present STOP BIT mode in the LCD.

Parity Bit

Stop Bit

Press the MODE Button one time.

(The stop bit has set to 2 stop bit.)

1 Stop Bit

2 Stop Bit

Press FEED button one time.

You will see present DENSITY mode in the LCD.

Stop Bit

Density

Press the MODE Button one time.

(The density has set to high.)

Density Medium

Density High

If all the mode have set, press the FEED Button and the MODE Button at the same

time after then release the buttons at the same time.

The printer will print out the mode status which has modied.

(RS-232C/9600 bps/7 Data bit/Even Parity/2 stop bit/Density High)

If the status is not correct, please try it again according to the procedure.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Pas de commentaire

Star Micronics SM-S401-DB38 Manuel Page 14