Star Micronics SM-S401-DB38 Manuel télécharger pdf (Page 12)

- 11 -

2.4.3. Recharging the battery pack

For recharging the battery pack, install the battery pack in the printer or the battery

holder.

Insert the Battery Charger to the charge connector of the printer or the battery

holder.

Cautions :

1) While charging the printer, turn off the printer power.

2) Do not remove the battery during charging.

3) If the printer is not used for a long time, unplug the power cord from

the printer and outlet.

4) You must use the supplied or optional battery charger.

5) Red Lamp: charging the battery.

Green Lamp: charging is nished.

Notes :

1) The battery is consumable parts and the use hour is gradually de-

creases. (Warranty 6 month)

2) The recharging time depends on the voltage level and ambient temper-

ature of the battery. Normally, if takes about 4 to 5 hours to recharge

a battery pack.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Pas de commentaire

Star Micronics SM-S401-DB38 Manuel Page 12