Star Micronics TSP654II-WebPRNT-2 Manuel télécharger pdf (Page 9)

RS-232C interface cable

USB cable

Cable hook

4 cm (maximum)

3-2-2. RS-232C Interface Cable

(1) Make sure that the AC adapter’s power cord is not connected to the outlet.

(2) Connect the interface cable to the connector on the rear panel of the printer.

(3) Tighten the connector screws.

3-2-3. USB Cable

To connect a USB cable, follow the procedure given below.

(1) Make sure that the AC adapter’s power cord is not connected to the outlet.

(2) Connect the USB cable to the USB port.

(3) As shown in the gure, pass the cable through the cable hooks to hold it in place.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Pas de commentaire

Star Micronics TSP654II-WebPRNT-2 Manuel Page 9