Star Micronics Multi-Font NX-2410 Manuel d'utilisateur Page 79
- Page / 119
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Perform one n/780-inch or n/276-inch line feed
Mode ASCII
Decimal
Hexadecimal
Both <ESC>
“J” n
27 74 n 1B4A n
Feeds the paper once by n/180 inches (Standard mode) or n/216 inches
(IBM mode), where n is between 0 and 255. Does not move the print
position right or left when DIP switch 1-2 is OFF; returns the carriage
to the left margin if DIP switch 1-2 is ON. Does not change the
line-spacing setting.
Perform one n/180-inch reverse line feed
Mode ASCII
Decimal
Hexadecimal
I
Std.
< ESC > “j” n
21 106 n IlB 6A n
I
Feeds the paper once by n/180 inches in the reverse direction, where n
is between 0 and 255. Does not move the print position right or left when
DIP switch 1-2 is OFF; returns the carriage to the left margin if DIP switch
1-2 is ON. Does not change the line-spacing setting. Ignored when friction
feed is used.
Feed paper n lines
Mode ASCII
Decimal
Hexadecimal
<ESC> “f’ “I” n 27
102 49 n IB 66 31 n
Both
<ESC> “f <I> n 27
102 1 n 1B 66 01 n
Feeds the paper n lines from the current line, where n is between 0 and
iii.
Set top of page at current position
1 Mode 1 ASCII I
Decimal
1 Hexadecimal 1
I
IBM <ESC>
“4”
27 52 1B 34
I
Sets the current position as the top-of-page position. Note that this can
also be done from the control panel.
Set page length to n lines
Mode ASCII
Decimal
Hexadecimal
Both <ESC>
“C” n
21 67 n IB 43 n
Sets the page length ton lines in the current line spacing, where n is between
1 and 127 in Standard mode or between 1 and 255 in IBM mode. Changing
the line spacing later does not alter the physical page length. The current
line becomes the top of the page.
- USERS MANUAL 1
- Quad-sized 5
- TABLEOFCONTENTS 6
- Appendix D CHARACTER SETS 8
- Chapter 7 9
- Bail lever: 10
- LOADING SINGLE SHEETS 14
- Mount the paper guide 14
- Semiautomatic loading 15
- Manual loading 16
- Paper unparking 20
- TEST PRINTING 20
- Short se/f test 20
- Long self test 21
- DIP SWITCH SETTINGS 22
- I Set #l 23
- Switch 2-1: 25
- Switches 2-5 to 2-8: 25
- Chapter 2 27
- On Line switch 28
- Paper feed switch 28
- Quiet Mode switch 29
- Sty/e/Pitch switch 29
- POWER-UP FUNCTIONS 30
- 20 GOSUB 100 32
- Reverse micro-feed 33
- Clearing the buffer 33
- USING THE PRINTER 37
- WITH COMMERCIAL SOFTWARE 37
- Printer command options 38
- Type styles 38
- Page width 38
- Initialization sequence 39
- Page alignment 39
- Other printer commands 40
- WITH DOS AND BASIC 43
- New file 45
- H$iE$; Mg’ti I( 47
- 16, 0 49
- Chapter 5 53
- Connector 55
- Prmt head 55
- TECHNICAL SPECIFICATIONS 59
- 4 Dot Matrix Size 60
- Character Sets 60
- Type Sty/es and Pitches 61
- Dimensions and Weight 61
- Environmental Requirements 62
- R fnterface Signals 62
- Pin No 63
- Direction Function 63
- PRINTER CONTROL COMMANDS 65
- Select LQ characters 66
- Select LQ type style 66
- Select ornament character 66
- Select italic characters 66
- I Decimal 70
- I Hexadecimal 70
- Pica pitch 71
- Elite pitch 71
- High-speed elite pitch 71
- High-density elite pitch 71
- Semi-condensed pitch 71
- Select fixed spacing 73
- Select master print mode 73
- Return to normal height 74
- IIC 45 n 75
- VERTICAL POSITION COMMANDS 76
- Feed paper n lines 79
- Set left margin 82
- Carriage return 83
- Set automatic line feed 83
- Set horizontal tab stops 85
- Reset a// tab stops 85
- Horizontal tab 85
- Relative horizontal tab 86
- GRAPHICS COMMANDS 87
- Select graphics mode 88
- Convert graphics density 89
- Define download characters 90
- Select ROM character set 91
- Set MS6 to 7 91
- Set MS8 to 0 91
- Accept MSB as is 91
- Repeat data 92
- Quiet print 92
- Cancel quiet print 92
- Cancel last line 92
- Cancel immediate print 93
- Set printer off-line 93
- Set printer on-he 93
- Stop printing 93
- Bidirectional printing 94
- Unidirectional printing 94
- Manual feed 94
- Auto feed 94
- Eject paper from ASF 95
- Reset printer 95
- Appendix c 97
- Super/subscript character 99
- ELSE A=9 :GOTO 1860 101
- CHARACTER SETS 105
- > N A n N 106
- > N * n 107
- CHARACTER SET #2 108
- I 1 m II 108
- I D I‘? 110
- 9 OuL25 111
- B 0 1% 112
- COMMAND SUMMARY 116
- MODE CONTROL CODE 118
- FUNCTION 118
- “(3, “(” “R” ‘;)” ‘Z)” 119
- ‘yD;E>‘sT” “)” “)” n 119
Produits connexes et manuels pour Imprimantes d'étiquettes Star Micronics Multi-Font NX-2410
(129 pages)
(100 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.061 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels