Star-micronics PCI/ISA System Board D6-IN Manuel d'utilisateur télécharger pdf (Page 42)

D6-IN System Board Manual

Chapter 4: The BIOS Setup Utility

NOTE: Do not enable this category unless your IDE drive

supports spin-down mode.

CRT

Selecting ON (default) powers down the display while

the system is in power saving mode. Before making

changes, “Customized” must be selected in the Power

Management Mode category.

Mouse Wakeup Event

This selection causes the system to "wakeup" from a

power savings mode if the mouse is moved or a button

is pressed. The selections are PS/2 (IRQ12), COM1

(IRQ4), COM2 (IRQ3) or Disabled. The default set-

ting is PS/2.

Standby Break Events

Setting an IRQ category to Enabled causes the system to

“wakeup” from a power savings mode if any activity

occurs at that IRQ. For example, if you have a modem

on IRQ3 and you set IRQ3 to enabled, the system

automatically wakes up every time the modem gets a

phone call. The default setting is Disabled.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 70 71

Pas de commentaire

Star-micronics PCI/ISA System Board D6-IN Manuel d'utilisateur Page 42